╳
Home
2022-10-30
For mechanical watches, if the watch runs fast or even stops, the watch is magnetized. Faced with this situation, we must find a way to demagnetize the watch, otherwise, the watch will lose its main function of watching the time.
Magnetic fields are the natural enemy of mechanical watches, but in daily life, magnetic fields are everywhere, such as televisions, headphones, computers, magnet buckles on bags, etc. So, when your love watch is unfortunately magnetized, what is the easiest way to demagnetize a mechanical watch? How to judge whether the watch is magnetic?
The watch is magnetized, and generally, it runs fast. If the hairspring coils are sucked and stuck together, the watch will go faster. However, if the watch is going fast, it is not necessarily magnetized. Whether the watch is magnetized can be verified by the following methods:
(1) The easiest way is to use a small, sensitive compass and place it flat on the table. When the compass pointer is still, point the watch from the top of the compass at close range and quickly repeatedly, and change a few more directions. Repeat The above actions, as long as the compass pointer moves, it indicates that the watch has been magnetized.
(2) Use a wooden skewer to move the outer ring of the hairspring to make the interval between each circle equal. After the wooden skewer leaves, the hairspring is still in a sticking state, indicating that it has been magnetized.
(3) The most accurate method is to go to a professional repair center and use a professional watch magnetometer to measure it, and then you can know whether the watch is magnetized. After knowing how to use the easiest watch demagnetization method to quickly solve the problem?
(1) If it is close to the maintenance center, it is recommended to send it to the maintenance center for demagnetization. The degaussing machines in professional maintenance are generally imported. The degaussing is relatively complete and only takes a few minutes. At the same time, the maintenance cost is relatively cheap, so if conditions permit, it is better to send it to the maintenance center for degaussing.
(2) Buy a degaussing device. Ordinary degaussing devices generally only need dozens of pieces, and the operation is relatively simple. Put the magnetized watch or parts 1.5-3CM above the demagnetization area, and press the red button with your finger to let The item is turned up and down, left and right on the degausser several times to demagnetize each part, and the time is about 5 to 10 seconds. Then release the button, unplug the power supply, and the demagnetization is completed.
(3) Put the watch in an unmagnetized iron box, and the magnetism of the mobile phone will be slowly absorbed by the iron block. You can also find an unmagnetized iron block with a hollow in the middle, and slowly wear the watch through the hollow place. come and wear them.
The above is the degaussing method of watches shared by mechanical watch manufacturers. If you need to buy a customized watch, please contact us.
2F, Building A, Shimei Industrial Park, Dalang Town, Longhua District, Shenzhen, China
Watch manufacturers: What kind of matching solutions can customized watches provide? 
